Procedure
1. Surface preparation
1) Steel Non-immersion:
- Prepare in accordance with SSPC-SP3 or SSPC-SP2
- Immersion: Blast all surface in accordance with SSPC-SP10
2) Concrete: All surfaces must be free of moisture, dust of cement, oil and any other contaminants
2. Environmental Conditions
- Over 5°C is ideal for painting and hardening.
- The surface temperature must be at least 3°C above the dew point to prevent moisture condensation.
- Drying time can be different under -5°C.
3. Application Equipment
- Conventional or airless spray, power mixer, roller
- Airless spray: Tip size-0.017~0.027inch, Output pressure-2100psi/143atm
- Conventional spray :A moisture and oil trap in the air supply line, mechanical agitator are recommended.
- Recommended thinning ratio: about 10%(Airless spray)
Caution for usage
1) Mix the material according to designed mixing ratio and use after stirring it until uniformly blended. And, Use the mixed paint within pot life.
2) Avoid applying paint on rainy days, high humidity(Over 85%) day, low temperature(Under -5°C) condition.
3) When applied over inorganic zinc, a mist coat is required for removing pinhole and bubbling.
4) Even if you use same product(color, lot), the painting equipment and method(thinning ratio) can cause different color.
So, you should check the color before using it.
5) When apply this paint to immersion region of concrete managing waterproofing, it is possible to occur peeling.
So, coating work have to be proceeded after checking the adhesion with our products.
6) When applying this paint over old coating (Enamel), use Superthinner30. If thinning a lot, wrinkling can be occurred.
7) When applying this paint to
Safety Precautions for handling
1) Store it indoor (5~35°C) condition, avoiding heat and open flame. And, keep it standing and being closed.
2) Dispose of the waste paint through the waste disposal company designated by the Ministry of Environment.
3) Since this product is a chemical product, it may deteriorate during long-term storage. Please refer to our customer
center for the products that have p assed this period.
Warning notice
- Please consult our enclosed here with warning
Application system
- Subsequent topcoat : SUPERTHANE 300BG, SPIFLON(S), etc.