Urecoat 100

Ureacoat 100, mainly composed of urethane resin, has excellent abrasion, corrosion, chemical, water and oil resistance with superior adhesion making it the perfect primer for concrete facilities.

Primer for concrete

View more

1. Surface Preparation

Prepare the surface free from any loose cement, dust,

Oil, moisture and other contaminants.

Do surface treatment(blast) at the high compressive-strength concrete surface to secure adhesion.

2. Environmental conditions

Air temperature : 10~35ºC

Surface temperature : Dew Point over 3ºC

Surface moisture content : up to 6%

Relative humidity : up to 80%

3. Application Equipment

Roller, Brush

4. Safety precautions

Keep away from heat and open flames
Avoid eye and excessive skin contact
Surface temperature must be at least 3°C above the dew point to prevent moisture condensation.
It is not permitted to work in condition of rainy, high humidity (80%~), and low temperature(below 5°C) day (It lead to problem of curing and adhesion)
When coating thickness is thick, adhesion is lower than normal coating thickness.
Don't use the thinner including alcohol, or paints won't cure.

5. Warning notice

Please consult our enclosed here with warning notice.

6. Typical Systems

Intermediate : URECOAT 205, URECOAT 215,

URECOAT 255, etc.

Top Coatings : URECOAT 300

View more

Finish	Glossy
Color	Clear
Applied over	Mortal, and concrete
Components	2
Volume solid(%)	33 ± 3%
Recommended dry film thickness	50μm
Coats	1~2
Theoretical coverage	6.6L/㎡ (@ D.F.T. 50 ㎛) Allow for application losses and surface irregularities..
Mixing ratio(A : B)	2:1(by Vol.)
Thinner	Up to 10% (URETHANE 1000 Thinner, T-1021)
Shelf life	12 months (When stored indoors at 5~35ºC)
	10°C	20°C	30°C
Set to touch(min)	30	20	10
Curing time(hr)	12	6	4
Absolutely dry(day)	3	2	2
Recoatable(day)	16~48	8~48	6~48

View more

Other Products

Urecoat 215 picture_as_pdf

Urecoat 215, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish.

Urecoat 300 picture_as_pdf

Urecoat 300, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish

Urecoat 255 picture_as_pdf

Urecoat 255, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish.