Urecoat 215

Urecoat 215, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish.
Indoor and outdoor floor for walking, playground, stadium, etc
View more

1. Surface Preparation

  • Prepare the surface free from any loose cement, dust,
  • Oil, moisture and other contaminants.

2. Environmental conditions

  • Air temperature : 5~35ºC
  • Relative humidity : up to 80%

3. Application Equipment

  • Rake, Trowel

4. Safety precautions

  • Mixing ratio must be observed and uniformly stir with a power mixer for about 3~5minutes before use.(Use an electric mixer from 1000RPM,500W)
  • Avoid contact with skin and eyes.
  • Keep adequate ventilation during application.
  • Use the mixed material within pot life.(20°C, 30min)
  • Do not mix with other paint products.
  •  Mix thinner with paints regularly.
  •  Check thinner-ratio before painting because emboss pattern is changeable by thinner
  •  Don't use the thinner including alcohol, or paints won't cure.

5. Warning notice

  • Please consult our enclosed here with warning notice.

6. Typical Systems

  • Recommanded Primer : Urecoat 100
  • Recommanded Top Coatings : Urecoat 300
View more
Finish Semi-Glossy
Color Wide Range
Applied over
Mortal, and concrete
Components 2
Volume solid(%) 97±2%
Recommended dry film thickness 2~3mm
Coats 1~2
Theoretical coverage 4.2kg/m2 (@ D.F.T. 3mm)
Allow for applicationlosses and surfaceirregularities.
Hardness(Shore A)
60 ~ 70
Tensile strength
over 2.5N/mm2
Elongation
over 450% 
Mixing ratio(A : B) A part : B part = 2 : 1
Thinner Up to 3% (URETHANE 1000 Thinner, T-1021)
Shelf life 3months (When stored indoors at 5~35ºC)
10°C 20°C 30°C
Set to touch(min) 48 24 18
Curing time(hr) 8 5 3
Absolutely dry(day) 40 30 20
Pot life(hr) 8 5 3
Recoatable(day) 2~3 1~3 1~3
View more
Other Products
Urecoat 100
Ureacoat 100, mainly composed of urethane resin, has excellent abrasion, corrosion, chemical, water and oil resistance with superior adhesion making it the perfect primer for concrete facilities.
Urecoat 300
Urecoat 300, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish
Urecoat 255
Urecoat 255, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish.