Star Enamel FD, high glossy enamel paint from alkyd resin, has excellent durability and adhesion. It is the perfect protective topcoat for iron and wood materials.
Used as a protective topcoat for iron and wood materials that are not exposed to harsh corrosive conditions.
View more


1. Surface Preparation

  • Prepare the surface free from any sand, dirt, oil, moisture, and cement powder.

2. Environmental Condition

  • Air temperature: 10 ~ 35 °C
  • Relative humidity: up to 85%
  •  The surface temperature must be at least 5°C above the dew point to prevent moisture condensation

3. Application Equipment

  • Low pressure airless spray, sprayer, brush and roller

Caution for usage

1) Be careful that there is a lot of drying delay in forming the overcoat in one time and observe the repainting interval

2) Keep adequate ventilation during application

3) Please check the conformity with the old paint film when using the repair paint

4) When painting (including TOUCH UP paint), even if it is the same product or LOT, check the color as much as possible.

5) Do not apply on old paint film of baking finished type, but apply on old enamel film after sanding treatment.

Caution for handling

1) Avoid applying paint on rainy days, high humidity(over 80%), low temperature(below 5°C) and high temperature

2) Store the product in a dry, cool place at room temperature (5 ~ 35°C) away from fire and direct sunlight. keep container tightly closed with the injection port facing upward

3) Do not mix this product with other paints.

4) After the painting work, please wash exposed skin thoroughly.

5) Dispose of the waste paint through the waste disposal company designated by the Ministry of Environment.

6) Since this product is a chemical product, it may deteriorate during long-term storage. Please use it within the validity period. Please use the product after confirming it with the consumer counseling room


Please consult our enclosed here with warning notice

Packing & Storage

Primer : Alkyd primer

Top coat : Star Enamel FD

View more
Finish Gloss, Semi gloss
Color  Wide range
Applied over Steel Components  1
Recommended dry
film thickness
60μm Recommended
(Dry film thickness 60μm)
*Allow for application losses and surface
Volume Solid 48% (white, semi gloss) Recoatable(25°C)

After 8hr
Coats 2~3
Dry times(25°C)
Dry hard:5hrs Diluent Thinner 6060
Diluent Ratio
Max 50%(wt%) Shelf life 12 months

View more
Other Products
Enamel Fast-Drying Primer
Enamel fast-drying primer, mainly composed of alkyd resin and high degree of purity pigment, has an excellent anti-corrosion, adhesion, impact resistance, and working ability. Also as a natural-drying designer primer, it has an excellent drying time, making it the perfect anti-corrosive primer for iron equipments.
SPIROLLTAN is a two-component air-drying paint based on acrylic polyol, non-yellowing polyisocyanate. It has such good characteristics as adhesion, mechanical property, highly appearance, chemical resistance, weather resistance and fast