SUPERDECK 100 is an elastic primer designed with elastic urethane resin as the main vehicle and has excellent penetration ability, minimizes pinholes in concrete coating and it has excellent adhesion with polyurea coating system strong.
Primer for Polyurea coating system on concrete.
View more


1. Surface treatment

  • The surface should be clean and free from sand, cement, dust and other contaminants.

2. Weather condition

  • Air temperature: 5 ~ 40 °C
  • Surface temperature: 5 ~ 40 °C
  • Relative humidity: 80% or less
  • The surface temperature must be at least 3°C above the dew point to prevent moisture condensation

3. Painting equipment

  • Brush, Roller, spray equipment

Causion for usage

1. This product is applicable to concrete and cannot be used on steel.

2. Keep the product from freezing (penetration and reaction may decrease)

3. Excessive dilution may decrease the performance of concrete reinforcement. Dilution may vary depending on environmental conditions. (Concrete porosity, surface hardness, water content, ambient temperature, etc.)

4. Apply this product to the concrete floor with a low pressure airless spray, low pressure sprayer or special equipment on a basis of 6.6 m2 / L (0.152 L / m2), then rub thoroughly with a brush until it is slippery while keeping it moist for 30 to 40 minutes.

5. Avoid painting on rainy day, high humidity (80% or more) and low temperature (below 5 °C).

Caution for handling

1. Store the product in a dry, cool place at room temperature (5 ~ 35 °C) away from fire and direct sunlight. Keep container tightly closed with the injection port facing upward.

2. Since the product is flammable, store it in a dry, cold cow at room temperature (5 ~ 35 °C) away from direct sunlight. Keep container tightly closed with the injection port facing upward.

3. Dispose of the waste paint through a waste disposal company designated by the Ministry of Environment. 4. Please use this product within the storage period. It is possible to use after period, but it is possible to increase to viscosity and be gel.


Please refer to the warning in the appendix.

Application System

1. Primer : SUPERDECK 100

2. Intermediate 1 : SUPERDECK 170, SUPERDECK 180, SPEEDDECK 102PLUS

3. Intermediate 2 : SUPERDECK U,H series

4. Top coat : SUPERDECK 300 (If necessary)

View more
Finish Impregnation into concrete Color Light brown
Applied over Concrete, Cement
Volume Solid
Recommended Coverage

Depends on the concrete surface.
Recoatable(25ºC) After 2hr
Dry times(25°C)

4 hrs

Thinner Urethane 1000 thinner, T-1021 thinner
Thinning Ratio Urethane 1000 thinner, T-1021 thinner
(MAX. 100%)
Depends on the concrete surface.Epocoat 1000 Thinner, Thinner 395
Shelf Life 12 months
(When stored indoors at 5~35ºC)
Packing Unit
18L [17.28KG] Recommendable D.F.T.

10°C 20°C 30°C
Dry touch(mins) 120 50 15
Dry through(day) 10 4 2.5
14~48 8~48 7~48
Recoatable(day) 2~3 1~2 1~2
View more
Other Products
SUPERDECK U-285 is special paint with spray coating method with Urea bond in the molecule. This is Pure urea-type paint for hard use without organic solvents and heavy metals, excellent impact resistance, cold resistance, water resistance, chemical resistance, durability, anticorrosion and abrasion resistance.
SUPERDECK H-290LC is a special paint with a spray coating system with Urea and Urethane bonds in the molecule. It is a hybrid polyurea type paint that has excellent impact resistance, cold resistance, water resistance, chemical resistance, durability, anticorrosive property, adhesion and abrasion resistance.
SUPERDECK 180, mainly composed of Urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for polyurea sealing as well as interior coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish..