1. Surface Preparation
- Prepare the surface free from any loose cement, dust,
- Oil, moisture and other contaminants.
- Do surface treatment(blast) at the high compressive-strength concrete surface to secure adhesion.
2. Environmental conditions
- Air temperature : 10~35ºC
- Surface temperature : Dew Point over 3ºC
- Surface moisture content : up to 6%
- Relative humidity : up to 80%
3. Application Equipment
4. Safety precautions
- Keep away from heat and open flames
- Avoid eye and excessive skin contact
- Surface temperature must be at least 3°C above the dew point to prevent moisture condensation.
- It is not permitted to work in condition of rainy, high humidity (80%~), and low temperature(below 5°C) day (It lead to problem of curing and adhesion)
- When coating thickness is thick, adhesion is lower than normal coating thickness.
- Don't use the thinner including alcohol, or paints won't cure.
5. Warning notice
Please consult our enclosed here with warning notice.
6. Typical Systems
Intermediate : URECOAT 205, URECOAT 215,
URECOAT 255, etc.
Top Coatings : URECOAT 300