Urecoat 215

Urecoat 215, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish.

Indoor and outdoor floor for walking, playground, stadium, etc

View more

1. Surface Preparation

Prepare the surface free from any loose cement, dust,

Oil, moisture and other contaminants.

2. Environmental conditions

Air temperature : 5~35ºC

Relative humidity : up to 80%

3. Application Equipment

Rake, Trowel

4. Safety precautions

Mixing ratio must be observed and uniformly stir with a power mixer for about 3~5minutes before use.(Use an electric mixer from 1000RPM,500W)
Avoid contact with skin and eyes.
Keep adequate ventilation during application.
Use the mixed material within pot life.(20°C, 30min)
Do not mix with other paint products.
Mix thinner with paints regularly.
Check thinner-ratio before painting because emboss pattern is changeable by thinner
Don't use the thinner including alcohol, or paints won't cure.

5. Warning notice

Please consult our enclosed here with warning notice.

6. Typical Systems

Recommanded Primer : Urecoat 100

Recommanded Top Coatings : Urecoat 300

View more

Finish	Semi-Glossy
Color	Wide Range
Applied over	Mortal, and concrete
Components	2
Volume solid(%)	97±2%
Recommended dry film thickness	2~3mm
Coats	1~2
Theoretical coverage	4.2kg/m2 (@ D.F.T. 3mm) Allow for applicationlosses and surfaceirregularities.
Hardness(Shore A)	60 ~ 70
Tensile strength	over 2.5N/mm2
Elongation	over 450%
Mixing ratio(A : B)	A part : B part = 2 : 1
Thinner	Up to 3% (URETHANE 1000 Thinner, T-1021)
Shelf life	3months (When stored indoors at 5~35ºC)

	10°C	20°C	30°C
Set to touch(min)	48	24	18
Curing time(hr)	8	5	3
Absolutely dry(day)	40	30	20
Pot life(hr)	8	5	3
Recoatable(day)	2~3	1~3	1~3

View more

Other Products

Urecoat 100 picture_as_pdf

Ureacoat 100, mainly composed of urethane resin, has excellent abrasion, corrosion, chemical, water and oil resistance with superior adhesion making it the perfect primer for concrete facilities.

Urecoat 300 picture_as_pdf

Urecoat 300, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish

Urecoat 255 picture_as_pdf

Urecoat 255, mainly composed of aliphatic urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for floor decorating as well as coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish.