SUPERPOXY 320GF

SUPERPOXY 320GF has excellent acid resistance to continuous and alternating service for a wide range at chemicals, solvent, caustic, crude and fuel oils, animal and vegetable oils and fats, neutral, alkaline and non-oxidizing salt solutions in water.

Tank lining for shop tanks, road tankers, barges and storage tanks in the chemical and petrochemical industries.

View more

Procedure

1. Surface preparation

  • Immersion : Blast all surface in accordance with SSPC-SP5. (“White Metal”, SIS Sa 3)
  • Concrete : As a fully cured state and prepare in accordance with blast cleaning or prickling

2. Environmental ConditionOver 10°C is ideal for painting and hardening.

  • The surface temperature must be at least 3°C above the dew point to prevent moisture condensation.

3. Application Equipment

  • Conventional or airless spray, power mixer, brush
  • Airless spray: Tip size-0.019~0.021inch Output pressure-2200psi/150atm (*Airless spray data are indicative and subject to adjustment)
  • Recommended thinning ratio : about 5% (Airless spray)

Caution for usage

1) Mix the material according to designed mixing ratio and use after stirring it until uniformly blended. And, Use the mixed paint within pot life.

2) Avoid applying paint on rainy days, high humidity(Over 85%) day, low temperature(Under -5°C) condition.

3) When applied over inorganic zinc, a mist coat is required for removing pinhole and bubbling.

4) Even if you use same product(color, lot), the painting equipment and method(thinning ratio) can cause different color. So, you should check the color before using it.

5) When apply this paint to immersion region of concrete managing waterproofing, it is possible to occur peeling. So, coating work have to be proceeded after checking the adhesion with our products.

6) When applying this paint over old coating (Enamel), use Superthinner30. If thinning a lot, wrinkling can be occurred.

7) When applying this paint to

Safety Precautions for handling

1) Store it indoor (5~35°C) condition, avoiding heat and open flame. And, keep it standing and being closed.

2) Dispose of the waste paint through the waste disposal company designated by the Ministry of Environment.

3) Since this product is a chemical product, it may deteriorate during long-term storage. Please refer to our customer center for the products that have p assed this period.

Warning notice

  • Please consult our enclosed here with warning

Application system

  • Subsequent topcoat : SUPERTHANE 300BG, SPIFLON(S), etc.
View more
Finish Semi-gloss
Color Silver
Applied over Steel, Galvanized steel, Old coating(Enamel) Components 2
Volume Solid Approximately 83% Recommended Film
Thickness 
 125~200 μm
 Coats 1~2 Mixing Ratio
A : B

1:1(vol)
Recommended
Coverage
6.64 m2/L ( @ D.F.T. 125μm)
* Allow for application losses and surface
irregularities.
 Pot life(20°C) 2hrs
Dry times(20°C) Dry through : 20hrs Recoatable(20C) To topcoat(min/max) : 18hrs ~ 1months
Diluent SUPERTHINNER 30, THINNER 395 Shelf Life
112months

(When stored indoors at 5~35C)
Packing Unit 18L[9L/9L], 4L[2L/2L]    
View more
Other Products
SUPERPOXY 1375
SUPERPOXY 1375 is a polyamide cured epoxy primer with high solids content designed for industrial and marine use in severe environmental condition. It is excellent primer in corrosive environments.
SPIPOXY FD PRIMER
SPIPOXY FD PRIMER, based on epoxy / polyamide resin, is an epoxy primer coating for industrial use with good adherence, corrosion resistance, and chemical resistance
SUPERPOXY 122LP
SUPERPOXY 122LP designed mainly on zinc polyamide epoxy primer, provides outstanding resistance to chemicals and severe weathering. This product is used as a shop primer for bare steel on new construction or major repair projects and as a field maintenance primer over bare steel or steel coated with organic or inorganic zinc primer and epoxy topcoats.
SUPERPOXY 270HB (HD)
SUPERPOXY 270HB(HD) is a high-build polyamide epoxy with high solids content designed for industrial and marine use in severe environmental condition. It provides excellent durability in marine atmosphere and economical long-term protection with only one coat.
SUPERPOXY 320
Superpoxy320, has excellent resistance to continuous and alternating service for a wide range at chemicals, solvents, caustic, crude and fuel oils, animal and vegetable oils and fats, neutral, alkaline and non-oxidizing salt solutions in water.
SUPERPOXY 360AL
SUPERPOXY 360AL is a high performance general maintenance coating that can be applied to new or old steel, requiring only the removal of loose rust and scale. It contains special ingredients that wet the surface and penetrate any existing rust.
SUPERPOXY 3230HT
SUPERPOXY 3230HT is a high density cross-linked epoxy phenolic coating suitable for protecting steelwork that is exposed to a wide range of highly corrosive environments, particularly insulated pipework subjected to wet and dry cycling, operating at temperatures up to 230°C. (Minimum temperature: -196°C) It meets CS-3, 4 for carbon steels and SS-2, 3 for stainless steels under thermal insulation according to NACE SP0198-10.
SUPERPOXY 5000NS
SUPERPOXY 5000NS used for drinking water tank interiors, is invented non solvent epoxy coating that has an excellent adhesion and durability. And it can make high dry film thickness without thinning. Also, this product suitable for KS F4921 and KC(Korea Certification).
SUPERTAR 4000
SUPERTAR 4000 is a polyamide-cured, high build coal-tar epoxy coating for non-immersion as well as immersion service, providing excellent corrosion and chemical resistance and full film thickness. It can be applied over both steel and concrete.