Heavy duty Coatings

SUPERPOXY 1375 is a polyamide cured epoxy primer with high solids content designed for industrial and marine use in severe environmental condition. It is excellent primer in corrosive environments.

SPIPOXY FD PRIMER, based on epoxy / polyamide resin, is an epoxy primer coating for industrial use with good adherence, corrosion resistance, and chemical resistance

SUPERPOXY 122LP designed mainly on zinc polyamide epoxy primer, provides outstanding resistance to chemicals and severe weathering. This product is used as a shop primer for bare steel on new construction or major repair projects and as a field maintenance primer over bare steel or steel coated with organic or inorganic zinc primer and epoxy topcoats.

SUPERPOXY 270HB(HD) is a high-build polyamide epoxy with high solids content designed for industrial and marine use in severe environmental condition. It provides excellent durability in marine atmosphere and economical long-term protection with only one coat.

Superpoxy320, has excellent resistance to continuous and alternating service for a wide range at chemicals, solvents, caustic, crude and fuel oils, animal and vegetable oils and fats, neutral, alkaline and non-oxidizing salt solutions in water.

SUPERPOXY 320GF has excellent acid resistance to continuous and alternating service for a wide range at chemicals, solvent, caustic, crude and fuel oils, animal and vegetable oils and fats, neutral, alkaline and non-oxidizing salt solutions in water.

SUPERPOXY 360AL is a high performance general maintenance coating that can be applied to new or old steel, requiring only the removal of loose rust and scale. It contains special ingredients that wet the surface and penetrate any existing rust.

SUPERPOXY 3230HT is a high density cross-linked epoxy phenolic coating suitable for protecting steelwork that is exposed to a wide range of highly corrosive environments, particularly insulated pipework subjected to wet and dry cycling, operating at temperatures up to 230°C. (Minimum temperature: -196°C) It meets CS-3, 4 for carbon steels and SS-2, 3 for stainless steels under thermal insulation according to NACE SP0198-10.

SUPERPOXY 5000NS used for drinking water tank interiors, is invented non solvent epoxy coating that has an excellent adhesion and durability. And it can make high dry film thickness without thinning. Also, this product suitable for KS F4921 and KC(Korea Certification).

SUPERTAR 4000 is a polyamide-cured, high build coal-tar epoxy coating for non-immersion as well as immersion service, providing excellent corrosion and chemical resistance and full film thickness. It can be applied over both steel and concrete.

SUPERTHANE 300BG, based mainly on acrylic resin and polyurethane, provides outstanding weather resistance with excellent color and gloss retention and resistance to broad range of corrosive atmosphere. It forms hard, tough, flexible, and abrasion resistance dry film.

SUPERZINC 190BG(F) is designed mainly on inorganic zinc silicate for preventing long-term corrosion of steel. It provides good anticorrosion by cathodic protection effect and has good weathering and heat resistance (withstands temperature up to 400°C).