Products

Sort by

View

EPOCOAT 5100 is a solvent-free epoxy coating that has excellent chemical and abrasion resistance, impact resistance and adhesion. It has outstanding self-leveling and appearance.

SUPERPOXY 1375 picture_as_pdf

SUPERPOXY 1375 is a polyamide cured epoxy primer with high solids content designed for industrial and marine use in severe environmental condition. It is excellent primer in corrosive environments.

WORLDTEX Interior picture_as_pdf

WORLDTEX Interior is an economical interior grade matt emulsion, suitable for use on most interior building surfaces.

FLAMECHECK SVH-250 picture_as_pdf

FLAMECHECK SVH-250 is designed to prevent the effects of fire on buildings, having excellent features to slow down the effects of fire and heat. This is a protective layer that creates a barrier between the flame and the surface of the material, made specifically for structural steel, increasing the fire resistance, heat of steel up to 3 hours.

SUPERCRETE W200 picture_as_pdf

SUPERCRETE W200 is high performance polyurethane resin flooring system, supplied as three components in pre-measured packs for ease of on site mixing and use. The cured system forms a strong, easily, layer from 4mm up to 7mm thick.

Waterproofing Membrane Ace picture_as_pdf

Waterproofing Membrane Ace, mainly composed of elastic urethane resin, are designed to provide excellent water and weather resistance for rooftops. These coatings have endured excessive tests in reviewing its reactions to weather, such as contraction and inflation, by conducting tests under various temperatures.

SUPERFOAM 230S picture_as_pdf

Super Foam 230S is medium-density, rigid polyurethane spray foam with excellent thermal conductivity, dimensional stability, adhesion to the surface and excellent thermal insulation. In addition, the resulting foam is uniform and continuous so that the mechanical properties and the water absorption are good, and the suitable workability is excellent due to the reactivity, and construction is possible regardless of the season.

EPOCOAT 210 TOP picture_as_pdf

EPOCOAT TOP, mainly composed of polyamide epoxy resin, has excellent abrasion, corrosion, chemical, waterand oil resistance with superior adhesion for concrete facilities.

Waterguard 600 picture_as_pdf

WATERGUARD 600, as a waterborne epoxy resin, has excellent adhesion and chemical, water, and abrasion resistances similar to a solvent based epoxy. It takes the advantages a solvent based epoxy offers without any harmful solvent components. Also, this goods proportionate to KS D 8502 water extractable test and have certification of KC which is safety standards of sanitation.

Unexposed Non-Tar waterprooftan (KS) picture_as_pdf

Unexposed Non-Tar waterprooftan(KS), mainly composed of an elastic urethane resin, is an unexposed 2 components tar-urethane waterproof coating that has superior elasticity and excellent endurance to contraction and inflation caused by temperature variation and earthquakes. It is a preventive coating with superior adhesion, elasticity, durability, and water and cold weather resistances.

FINECOAT 390HD BIO picture_as_pdf

Anti-Bacteria Coatings

- By applying the Organic and In-organic anti-microbial in the paint, effective prevention the growth of bacteria on the surface of film.

- Excellent anti-microbial performance / Various Color / Panel for building.

FINECOAT 230 picture_as_pdf

FINECOAT 230 is based on high molecular weighted polyester which has outstanding flexibility and excellent chemical resistance. It can be applied over various home appliances, especially a washing machine.

UNISTER(VN) TOP COAT picture_as_pdf

UNISTER(VN) TOP COAT is a thermosetting coating based on a combination of polyester and Melamine resins.
It is possible to bake and dry in very short time. Any color shade with or without gloss is available. Although primarily designed as an exterior coating, It can also be used for interior application.

UNISTER(VN) MATT picture_as_pdf

UNISTER(VN) MATT is based on a combination of polyester and Melamine resins.
It’s formulated for outdoor coating demanding outstanding durability.
It provides versatile and excellent performances like high durability, scratch resistance, etc.
Especially, it provides the unique design characteristic (Soft texture of a material) which uses a special Filler with excellent durability and a bumpy surface of the film.

UNISTER(VN) POLYESTER BACK picture_as_pdf

These specifications apply to “UNISTER(VN) EP BACK COAT”, an epoxy back coat. It gives an excellent performance on all types of substrates and pre-treatments. Excellent P/U foam adhesion and Anti-corrosion. Primarily designed for back of sandwich panel, it can also be used for Service back coating.

Heat-dried Coatings picture_as_pdf

SUPERFOAM 228 picture_as_pdf

This product which have remarkable thermal insulation capability and usability is spray type urethane foam for thermal insulation or freezing house, factory, house..

SUPERFOAM 224 picture_as_pdf

Super Foam 224 is low- free rise density rigid spray foam that has excellent thermal conductivity, dimensional stability, and adhesion to the ground surface. In addition, generation and form uniformly and continuously followed by good mechanical properties and resistance to water absorption, and by the suitable reactive workability is excellent and can be constructed regardless of the season.

SUPERDECK U-285 picture_as_pdf

SUPERDECK U-285 is special paint with spray coating method with Urea bond in the molecule. This is Pure urea-type paint for hard use without organic solvents and heavy metals, excellent impact resistance, cold resistance, water resistance, chemical resistance, durability, anticorrosion and abrasion resistance.

SUPERDECK H-290LC picture_as_pdf

SUPERDECK H-290LC is a special paint with a spray coating system with Urea and Urethane bonds in the molecule. It is a hybrid polyurea type paint that has excellent impact resistance, cold resistance, water resistance, chemical resistance, durability, anticorrosive property, adhesion and abrasion resistance.

SUPERDECK 180 picture_as_pdf

SUPERDECK 180, mainly composed of Urethane resin, is an elastic floor coating that provides non-slip quality that is suitable for polyurea sealing as well as interior coating for architectural surfaces. It is a soft touch, anti-abrasion coating with superior adhesion for a beautiful finish..

SUPERDECK 100 picture_as_pdf

SUPERDECK 100 is an elastic primer designed with elastic urethane resin as the main vehicle and has excellent penetration ability, minimizes pinholes in concrete coating and it has excellent adhesion with polyurea coating system strong.

Metal Vapor Deposition picture_as_pdf

Coatings over electronic devices such as mobile phones, tablets, IT accessories.

Providing excellent surface, weather resistance and durability. Safe in VOC levels.

SPIPOXY FD PRIMER picture_as_pdf

SPIPOXY FD PRIMER, based on epoxy / polyamide resin, is an epoxy primer coating for industrial use with good adherence, corrosion resistance, and chemical resistance

SUPERPOXY 122LP picture_as_pdf

SUPERPOXY 122LP designed mainly on zinc polyamide epoxy primer, provides outstanding resistance to chemicals and severe weathering. This product is used as a shop primer for bare steel on new construction or major repair projects and as a field maintenance primer over bare steel or steel coated with organic or inorganic zinc primer and epoxy topcoats.

SUPERPOXY 270HB (HD) picture_as_pdf

SUPERPOXY 270HB(HD) is a high-build polyamide epoxy with high solids content designed for industrial and marine use in severe environmental condition. It provides excellent durability in marine atmosphere and economical long-term protection with only one coat.

SUPERPOXY 320 picture_as_pdf

Superpoxy320, has excellent resistance to continuous and alternating service for a wide range at chemicals, solvents, caustic, crude and fuel oils, animal and vegetable oils and fats, neutral, alkaline and non-oxidizing salt solutions in water.

SUPERPOXY 320GF picture_as_pdf

SUPERPOXY 320GF has excellent acid resistance to continuous and alternating service for a wide range at chemicals, solvent, caustic, crude and fuel oils, animal and vegetable oils and fats, neutral, alkaline and non-oxidizing salt solutions in water.

SUPERPOXY 360AL picture_as_pdf

SUPERPOXY 360AL is a high performance general maintenance coating that can be applied to new or old steel, requiring only the removal of loose rust and scale. It contains special ingredients that wet the surface and penetrate any existing rust.

SUPERPOXY 3230HT picture_as_pdf

SUPERPOXY 3230HT is a high density cross-linked epoxy phenolic coating suitable for protecting steelwork that is exposed to a wide range of highly corrosive environments, particularly insulated pipework subjected to wet and dry cycling, operating at temperatures up to 230°C. (Minimum temperature: -196°C) It meets CS-3, 4 for carbon steels and SS-2, 3 for stainless steels under thermal insulation according to NACE SP0198-10.

SUPERPOXY 5000NS picture_as_pdf

SUPERPOXY 5000NS used for drinking water tank interiors, is invented non solvent epoxy coating that has an excellent adhesion and durability. And it can make high dry film thickness without thinning. Also, this product suitable for KS F4921 and KC(Korea Certification).

SUPERTAR 4000 picture_as_pdf

SUPERTAR 4000 is a polyamide-cured, high build coal-tar epoxy coating for non-immersion as well as immersion service, providing excellent corrosion and chemical resistance and full film thickness. It can be applied over both steel and concrete.

SUPERTHANE 300BG picture_as_pdf

SUPERTHANE 300BG, based mainly on acrylic resin and polyurethane, provides outstanding weather resistance with excellent color and gloss retention and resistance to broad range of corrosive atmosphere. It forms hard, tough, flexible, and abrasion resistance dry film.

SUPERZINC 190BG(F) picture_as_pdf

SUPERZINC 190BG(F) is designed mainly on inorganic zinc silicate for preventing long-term corrosion of steel. It provides good anticorrosion by cathodic protection effect and has good weathering and heat resistance (withstands temperature up to 400°C).

SUPERZINC 190BG(S) picture_as_pdf

SUPERZINC 190BG(S) is designed mainly on inorganic zinc silicate for preventing long-term corrosion of steel. It provides good anticorrosion by cathodic protection effect and has good weathering and heat resistance (withstands temperature up to 400°C).

Enamel Fast-Drying Primer picture_as_pdf

Enamel fast-drying primer, mainly composed of alkyd resin and high degree of purity pigment, has an excellent anti-corrosion, adhesion, impact resistance, and working ability. Also as a natural-drying designer primer, it has an excellent drying time, making it the perfect anti-corrosive primer for iron equipments.

SPIROLLTAN picture_as_pdf

SPIROLLTAN is a two-component air-drying paint based on acrylic polyol, non-yellowing polyisocyanate. It has such good characteristics as adhesion, mechanical property, highly appearance, chemical resistance, weather resistance and fast

STARENAMEL FD picture_as_pdf

Star Enamel FD, high glossy enamel paint from alkyd resin, has excellent durability and adhesion. It is the perfect protective topcoat for iron and wood materials.

EASYTEX Exterior picture_as_pdf

EASYTEX Exterior is a high-quality, weather-resistant acrylic paint, suitable for use without a primer on exterior and interior surfaces of concrete, plywood, anti-rust primed steel, etc. EASYTEX Exterior gives outstanding economy with the advantage of a low material consumption rate and excellent adhesion. Application is by brush, roller airless or conventional spray. Various colours can be matched on request.

EASYTEX Interior picture_as_pdf

EASYTEX Interior is an economical interior grade low reflectance matt emulsion suitable for use on ceilings. EASYTEX Interior can be applied as an even coating or in stippled form. It is normally available in white but special shades can be made to order.

EASYTEX Primer picture_as_pdf

EASYTEX Primer is a highly developed product in liquid form, which is absorbed deeply into the substrate of cementitious materials, plasters and limes. It binds the substrate and the surface, to give a solid base for decorative finishing coats, such as SAMHWA Textured Coatings, paints and thin-layer mortars. EASYTEX Primer is available in clear.

STARTEX Exterior picture_as_pdf

STARTEX Interior is a high quality matt emulsion with high coverage suitable for application on most internal building surfaces. It offers the advantage of low material consumption with a high quality professional finish.

STARTEX Interior picture_as_pdf

STARTEX Primer picture_as_pdf

STARTEX Primer is a pigmented penetrating primer, which is absorbed deeply into the substrate of cementitious materials, plasters and limes. It binds the substrate and the surface, to give a solid base for decorative finishing coats, such as SAMHWA Textured Coatings, paints and thin-layer mortars.st interior building surfaces.

WORLDTEX Exterior picture_as_pdf

WORLDTEX Interior is an economical interior grade matt emulsion, suitable for use on most interior building surfaces.

WORLDTEX Primer picture_as_pdf

WORLDTEX Primer is a highly developed product in liquid form, which is absorbed deeply into the substrate of cementitious materials, plasters and limes. It binds the substrate and the surface, to give a solid base for decorative finishing coats, paints and thin-layer mortars. It is supplied as white or tinted as per finish colour.

Spiseal Urethane Sealant picture_as_pdf

SPISEAL URETHANE SEALANT, mainly composed of urethane resin, is a two component sealant with excellent elasticity, durability, tensile strength, corrosion, physical properties. It has excellent elasticity and restorative ability, and it has excellent resistance to dynamic change of the adhered material. It does not shrink after curing and keeps initial flexibility constantly. Therefore, it has strong resistance to shrinkage and elongation. It is also possible to paint on top and it shows excellent adhesion to cement and plastic.

New Watertan picture_as_pdf

New Watertan is a waterproof paint using water-soluble acrylic emulsified urethane resin with one-component water - soluble type. It has strong elasticity, adhesion force and durability and forms a coating film with excellent waterproof property. Therefore, it prevents water from penetrating into cracks due to contraction and expansion due to temperature difference of architectural base, It is a water-soluble paint suitable for waterproofing roofs and flat roofs with a slope that is gentle and protected.